Welfare Unit Operation Guide

This guide is for all available sizes and layouts listed below.

Heating systems

We have 2 types of heating system depending on your Ecosmart model. Check below for your heating type and how to operate.

Type 1: Downflow

Wall mounted fan heater. Pull cord to activate.

NOTE: This heat needs the generator ON to run. Some models my auto-start the generator. Other require manual generator activation.

Drying room heating

Use the controls next to the heater to activate.

NOTE: This heat needs the generator ON to run. Some models my auto-start the generator. Other require manual generator activation.

Type 2: 'Air' Diesel heating

Canteen / Office & Drying Room

Use the controls to activate the heating system. Heat comes from the vents under the seats. This system is independent from the generator and runs from batteries and the diesel tank.

NOTE: All heating on the Ecosmart SolarMAX is powered from battery power. The generator will only start if the batteries need to be charged.

Heating Fault Codes

1 Flash ‒ No start / failed start

2 Flashes ‒ Flame failure during operation

3 Flashes ‒ Overheat / coolant circulation issue

4 Flashes ‒ Glow plug / flame sensor fault

5 Flashes ‒ Fuel pump circuit fault

6 Flashes ‒ Fan motor fault

7 Flashes ‒ Voltage too low / high

8 Flashes ‒ Control unit internal error

9 Flashes ‒ Coolant temperature sensor fault

NOTE: Please contact your hire partner to fix fault codes. Do not attempt to access the systems areas.

Daily Checks

It is important that the user of this unit carries out some basic checks to ensure the unit runs and operates safely.

Notify your hire partner

If you have any problems with these checks. Some hire companies with have different procedures. AJC EasyCabin are not responsible for the maintenance of this unit.